LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Front Suspension & Wheel Alignment) >> Front >> Stabilizer Bar, Front >> Description >> Disconnecting Stabilizer Bar

Disconnecting Stabilizer Bar

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

This feature will provide feedback to the driver and be controlled by an electronic module (part of the stabilizer bar) which communicates via CAN C at 500 kbps. The disconnecting stabilizer bar module will read the ignition switch, vehicle speed, transfer case, and stabilizer bar switch messages on the CAN C bus and control the disconnecting stabilizer bar. The module will send a stabilizer bar status message and a lighting message on CAN C.

scientia non olet · About LEMON Manuals