Shock Absorber, Suspension: Removal: Removal

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Shock, Grommet & Stud

Courtesy of CHRYSLER GROUP, LLC

Raise and support the vehicle.
Remove the inner fender well.
Remove the nut, retainer and grommet (2) from the upper stud (1).

Fig 2: Shock, Nut & Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the lower nut and bolt (2) from the axle bracket and remove the shock absorber (1).