LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Cooling System) >> Engine >> Pump, Water >> Removal >> 2.8L

Pump, Water: Removal: 2.8L

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the radiator fan. Refer to FAN, COOLING, REMOVAL .
  3. Drain the cooling system. Refer to STANDARD PROCEDURE .
    Fig 1: Removing/Installing Timing Belt
    GC0082180Courtesy of CHRYSLER GROUP, LLC
  4. Remove the timing belt.
    Fig 2: Removing/Installing Inner Front Cover
    GC0085597Courtesy of CHRYSLER GROUP, LLC
  5. Remove the inner timing cover.
    Fig 3: Identifying Water Pump
    GC0085594Courtesy of CHRYSLER GROUP, LLC
  6. Remove bolts and the pump assembly.
scientia non olet · About LEMON Manuals