LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Cooling System) >> Engine >> Bottle, Pressurized Coolant >> Removal >> Diesel Engine

Diesel Engine

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Coolant Recovery Container - Diesel
GC0130717Courtesy of CHRYSLER GROUP, LLC
  1. Remove the pressure cap (1).
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove and plug coolant hose (3).
  4. Remove he mounting nuts and the pressurized coolant bottle (2) from vehicle.
scientia non olet · About LEMON Manuals