LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 2.8L

TENSIONER, Belt: Installation: 2.8L

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accessory Drive Belt & Drive Belt Tensioner
GC0145396Courtesy of CHRYSLER GROUP, LLC
  1. Install serpentine belt tensioner (2). Tighten bolt (1) to 45 N.m (33 ft. lbs.).
  2. Install the accessory drive belt (1). Refer to BELT, SERPENTINE, INSTALLATION .
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals