Pulley, Idler: Removal: 3.6L
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The bolts used to fasten the idler pulleys to the engine are different lengths. The left side idler bolt (3) is longer than the right side idler bolt (4).
- Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
- Remove the bolt (3 and 4) from its respective idler pulley (1 and 2).
- Remove the idler from the engine.