LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Exhaust System) >> Pipe, Exhaust >> Removal >> Gas Exhaust Pipe

Gas Exhaust Pipe

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Exhaust System Components - Gas Engines
GC0169866Courtesy of CHRYSLER GROUP, LLC
  1. Remove the exhaust muffler. Refer to MUFFLER, EXHAUST, REMOVAL .
  2. Saturate the exhaust clamp nut (12) with a Mopar® rust penetrant. Allow 5 minutes for penetration.
  3. Remove the exhaust isolators (13, 15).
  4. Loosen the exhaust clamp nut (12) and remove the exhaust pipe (14) from the vehicle.
scientia non olet · About LEMON Manuals