Diesel Exhaust Pipe

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Saturate the studs and nuts (1) with a Mopar® rust penetrant. Allow 5 minutes for penetration.
Remove the muffler. Refer to MUFFLER, EXHAUST, REMOVAL .

Fig 1: Identifying Rear Exhaust Isolator
Courtesy of CHRYSLER GROUP, LLC
Remove the rear exhaust isolator (1).

Fig 2: Identifying Front Exhaust Isolator & Clamp Nut
Courtesy of CHRYSLER GROUP, LLC
Remove the front exhaust isolator (1).
Loosen the clamp nut (1) and remove the exhaust pipe from vehicle.