Vapor Canister
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
| M10 Locations: |
| Vapor Canister (1) |
| M12 Locations: |
| Fuel Tank Crossmember (3) |
- Using a cut off wheel or equivalent, remove the vapor canister support bolt with the damaged weld nut.
- Remove the damaged weld nut from the access hole in the top of the crossmember (1).
- Position a new M10 type 1 nut into the access hole and install the vapor canister bolt. Refer to CANISTER, VAPOR, INSTALLATION .