LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Frame And Bumpers) >> Frame >> Standard Procedure >> Front Frame Rail Tip Replacement >> Bracket Locations And Modifications

Bracket Locations And Modifications

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bracket Holes
GC0131099Courtesy of CHRYSLER GROUP, LLC
1 - 20 mm HOLE (13/16 inch)
2 - 27.7 mm (1.09 inch)
3 - 15 mm HOLE (5/8 inch)
4 - 869.2 mm (34.2 inch)
5 - 359.6 mm (14.2 inch)
6 - 453.8 mm (17.9 inch)
7 - 354.8 mm (14 inch)
8 - 12.5 mm HOLE (1/2 inch)
Fig 2: Identifying Bracket Locations
GC0131100Courtesy of CHRYSLER GROUP, LLC
1 - FESM BRACKET
2 - 239.6 mm (9.43 inch)
3 - 335.1 mm (13.2 inch)
4 - FRAME RAIL TIP