Frame Dimensions

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

Frame dimensions are listed in metric scale. All dimensions are from center to center of Principle Locating Point (PLP), or from center to center of PLP and fastener location.

VEHICLE PREPARATION:

Position the vehicle on a level work surface. Using screw or bottle jacks, adjust the vehicle PLP heights to the specified dimension above a level work surface. Vertical dimensions can be taken from the work surface to the locations indicated were applicable.

INDEX

DESCRIPTION	FIGURE
PLAN VIEW - TWO DOOR JK ONLY	Refer to Fig 1.
SIDE VIEW - TWO DOOR JK ONLY	Refer to Fig 2.
PLAN VIEW - FOUR DOOR JK ONLY	Refer to Fig 3.
SIDE VIEW - FOUR DOOR JK ONLY	Refer to Fig 4.

Fig 1: Plan View - Two Door

Courtesy of CHRYSLER GROUP, LLC

Fig 2: Side View - Two Door Jk Only

Courtesy of CHRYSLER GROUP, LLC

Fig 3: Plan View - Two And Four Door J8

Courtesy of CHRYSLER GROUP, LLC

Fig 4: Side View - Four Door

Courtesy of CHRYSLER GROUP, LLC