LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Steering System) >> Pump >> Hose, Power Steering >> Removal >> Pressure Hose

Pressure Hose

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressure Hose, Fitting & Routing Clip Retainers
GC0153980Courtesy of CHRYSLER GROUP, LLC
  1. Siphon as much fluid as possible from the power steering fluid reservoir.
  2. Remove the air box assembly. Refer to BODY, AIR CLEANER, REMOVAL .
  3. Remove the pressure hose fitting (1) at the pump.
  4. Remove the pressure hose routing clip retainers (3) at the frame.
    Fig 2: Steering Gear Hoses/Tubes
    GC0131144Courtesy of CHRYSLER GROUP, LLC
  5. Move the coolant bottle to the side out of the way.
  6. Remove the pressure hose (2) at the gear.
  7. Remove the pressure hose (2) from the vehicle.
scientia non olet · About LEMON Manuals