LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Steering System) >> Pump >> Diagnosis And Testing >> Power Steering Pump And Hoses >> Checking For Wear Of Power Steering Pump Internal Components

Checking For Wear Of Power Steering Pump Internal Components

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place gear selector in PARK (or NEUTRAL) with wheels chalked.
  2. With the engine idling, have a helper turn the steering wheel.
  3. Using an electronic listening tool, determine if noise is coming from the pump.
  4. Increase the engine speed and have a helper turn the steering wheel. Does the noise change with load?
  5. Replace the power steering pump if excessive noise is present. Refer to PUMP, REMOVAL .
scientia non olet · About LEMON Manuals