LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Steering System) >> Column >> Shaft, Intermediate >> Installation >> Upper Intermediate Shaft

Upper Intermediate Shaft

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pinch Bolt & Lower Intermediate Shaft Coupler
GC0148175Courtesy of CHRYSLER GROUP, LLC
  1. Install the intermediate shaft (4) to studs at the cowl.
  2. Install the two mounting nuts (1) and tighten to 13 N.m (115 in. lbs).
  3. Install the lower intermediate shaft coupler (3) to the upper intermediate shaft (4).
  4. Install the pinch bolt (2) and tighten to 49 N.m (36 ft. lbs.).
    Fig 2: Bolt, Upper Coupler & Steering Column
    GC0148176Courtesy of CHRYSLER GROUP, LLC
  5. Install the upper shaft coupler (2) to the steering column (4).
  6. Install and tighten the pinch bolt (1) to 49 N.m (36 ft. lbs.).
  7. Unlock the steering wheel.
  8. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals