LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Steering System) >> Column >> Shaft, Intermediate >> Installation >> Lower Intermediate Shaft

Lower Intermediate Shaft

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pinch Bolt At Column Shaft
GC0085670Courtesy of CHRYSLER GROUP, LLC
  1. Install the intermediate shaft to the vehicle.
  2. Install the lower intermediate shaft (3) to the upper intermediate shaft (1).
  3. Install the upper pinch bolt (2) and tighten the bolt to 49 N.m (36 ft. lbs.).
    Fig 2: Lower Coupling At Gear
    GC0131140Courtesy of CHRYSLER GROUP, LLC
  4. Install the coupler (1) at the steering gear (2).
  5. Install the lower coupler pinch bolt at the steering gear and tighten the bolt to 49 N.m (36 ft. lbs.).
  6. Unlock the steering wheel.
  7. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals