Blade, Wiper: Removal: Rear

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.

Fig 1: Rear Wiper Blade

Courtesy of CHRYSLER GROUP, LLC

Lift the wiper arm (2) to raise the wiper blade and element (1) off of the glass.
To remove the blade from the arm, swing the end of the wiper blade nearest to the wiper motor away from the wiper arm to its travel limit.
Now press the end of the wiper blade nearest to the wiper motor away from the wiper arm against its stop far enough to unsnap the wiper blade pivot pin from the latch features on the underside of the wiper arm.
Gently lower the tip of the wiper arm onto the glass.