Blade, Wiper: Installation: Rear
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.
- Lift the wiper arm (2) off of the lift glass.
- Position the wiper blade (1) under the tip of the wiper arm, aligning the pivot pin near the center of the blade superstructure with the latch features on the underside of the tip of the arm.
- Squeeze the arm and blade together until the blade pivot pin snaps into the latch features of the arm.
- Gently lower the wiper blade and element onto the glass.