BTSI Override
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
In the event of an electrical failure, the vehicle can be shifted out of PARK by using the following procedure:
- "Turn the key to the ACC or ON position.
- Using a small screwdriver remove the override cap from shifter bezel (right side of gate in D).
- Insert in hole a key or screwdriver and depress.
- While the override is depressed, move the shifter out of the PARK position.
- Reinsert the override cap on shifter bezel.