LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Nag1 Automatic Transmission (Service Information)) >> Cable, Shift >> Diagnosis And Testing >> Diagnosis And Testing - Gearshift Cable

Diagnosis And Testing - Gearshift Cable

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. The floor shifter lever and gate positions should be in alignment with all transmission positions, P - R - N - D - 2 - 1 shown in cluster. Misalignment requires cable readjustment.
  2. Engine start must not be possible in any other gear position - if occurs the cable must be readjusted.