LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 ((Totally Integrated Power Module (TIPM) - Electrical Diagnostics)) >> DTC Troubleshooting >> C1405-Transfer Case Range Position Sensor Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

The Totally Integrated Power Module (TIPM) detects 5.0 volts on the Transfer Case Range Position Sensor Signal circuit for two seconds when voltage should not be present.

scientia non olet · About LEMON Manuals