LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 ((Totally Integrated Power Module (TIPM) - Electrical Diagnostics)) >> DTC Troubleshooting >> B10EC-Blower Motor Control Circuit OVERCURRENT >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

If during blower motor operation, the Totally Integrated Power Module (TIPM) detects an over-current condition on the (C7) Blower Motor Supply circuit for more than 500 msec.

scientia non olet · About LEMON Manuals