LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 ((Antilock Brake System (Abs) - Electrical Diagnostics)) >> DTC Troubleshooting >> C123A-Esp System Sensors Calibration >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

INITIALIZE ANTI-LOCK BRAKES MODULE 

  1. Initialize ECU. Refer to ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .

    Does this DTC reset?

    Yes 

    • Replace the Anti-Lock Brake Module in accordance with the Service Information.
    • Perform ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .

    No 

    • Test complete.