When Monitored
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Ignition on, TCM not in initialization phase, no input speed sensor 1 or 2 (N2-N3) DTCs, no CAN bus or PCM DTCs, no CAN engine speed signal or engine torque signal not implausible DTCs, engine speed greater than 450 RPM, no shift in progress, gear 1, 2, 3, 4 or 5 engaged, and the TCM torque converter status is SLIP