LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 ((Electronic Shift Module (ESM) - Electrical Diagnostics)) >> DTC Troubleshooting >> P0931-BTSI Control Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

The DTC will set if the high side driver detects an open load for 10 seconds.

scientia non olet · About LEMON Manuals