LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 62TE Automatic Transmission)) >> DTC Troubleshooting >> P0992-2/4/Od Hydraulic Pressure Test >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

CHECK TO SEE IF DTC P0992 IS CURRENT 

NOTE:

The vehicle must be driven to set this DTC. The transmission must be at normal operating temperature with the Engine RPM above 1000 RPM.

  1. This DTC is an indication of both the 2/4 and the O/D Hydraulic Pressure Switch DTCs are present.
  2. Perform the diagnostic procedures for both P0845 and P0870.
  3. With the scan tool, check the Event Data to help identify the conditions in which the DTC was set.

    Repair