LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 41TE Automatic Transmission)) >> DTC Troubleshooting >> P1745-Transmission Line Pressure Too High For Too Long >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR RELATED DTCS 

  1. With the scan tool, check for Transmission Line Pressure DTCs.
    NOTE:

    In order to erase this DTC you must reset (erase) the VLP Shift Counter and the Output tooth counter which is a single procedure under Miscellaneous functions in the scan tool called "Clear Variable Line Pressure (VLP) counters".

    Repair 

scientia non olet · About LEMON Manuals