LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Steering System) >> Pump >> Hose, Power Steering, Supply >> Removal >> Diesel Engine

Diesel Engine

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before proceeding, refer to WARNING .

  1. Remove the engine top appearance cover.
  2. Siphon as much fluid as possible from power steering fluid reservoir.
    Fig 1: Supply Hose
    GC0082523Courtesy of CHRYSLER GROUP, LLC
  3. Remove the clamp (3) securing the supply hose (1) to the power steering pump supply fitting (2), then remove the hose from the fitting.
    Fig 2: Fluid Reservoir
    GC0082527Courtesy of CHRYSLER GROUP, LLC
  4. Remove the hose clamp (4) securing supply hose to the power steering fluid reservoir (5). Slide the hose off the end of the reservoir fitting and remove from vehicle.