LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Steering System) >> Pump >> Hose, Power Steering, Pressure >> Removal >> Right-Hand-Drive - 2.0L Diesel Engine

Right-Hand-Drive - 2.0L Diesel Engine

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before proceeding, refer to WARNING .

Fig 1: Pressure Line
GC0082522Courtesy of CHRYSLER GROUP, LLC
  1. Siphon as much fluid as possible from power steering fluid reservoir.
  2. Remove the engine appearance cover.
  3. Remove the pressure line (3) at the pump (4).
  4. Remove the pressure line routing bracket bolt (2) at the upper mount (7).
  5. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    Fig 2: Hoses AT RHD Gear
    GC0098924Courtesy of CHRYSLER GROUP, LLC
  6. Un-thread the tube nut (2) and remove the pressure hose (2) at the steering gear.
  7. Remove the power steering pressure hose from the vehicle.