3.6L Engine

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hose Fitting & Pump

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Before proceeding, refer to WARNING .

Siphon as much fluid as possible from the power steering fluid reservoir.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the pressure hose (2) at the pump (1).

Fig 2: Identifying Hoses AT Gear
Courtesy of CHRYSLER GROUP, LLC
Unscrew the tube nut (3), then remove the pressure hose (4) at the steering gear.

Fig 3: View Of Hoses AT Rear Of Crossmember
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (1) securing the power steering hose routing clamps (2) to the rear of the crossmember.
Remove the power steering pressure hose from the vehicle.