Shroud, Steering Column, Lower: Installation: Installation
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
- Push the tilt lever (4) downward (released position).
- Install the lower shroud over the tilt lever and onto the column.
- Install the upper shroud onto the lower shroud, clipping the shrouds to one another.
- Install the three screws (1, 2, 5) attaching the lower shroud to the steering column.
- Snap the gap hider clips (3) into the lower shroud.
- Position the column tilt at the full-upward position.
- Push the tilt lever (4) upward, locking the column in place.