LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Occupant Restraint Controller (Orc) - DTCS B1B00 To B1C19) >> DTC Troubleshooting >> B1B55-1ST Row Passenger SEATBELT Sensor Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

SHORT TO VOLTAGE: If the ORC detects the passenger seat belt buckle switch circuits have been shorted to voltage for 2.5 seconds. The active code will change to stored after the ORC verifies the seat belt switch sense circuit voltage has returned to normal voltage range for five seconds.

OPEN: If the ORC detects the passenger seat belt buckle switch circuits have been open for 2.5 seconds. The active code will change to stored after the ORC verifies the passenger seat belt buckle switch sense circuit voltage has returned to normal voltage range for five seconds.