LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Occupant Restraint Controller (Orc) - DTCS B1B00 To B1C19) >> DTC Troubleshooting >> B1B51-1ST Row Driver SEATBELT Sensor Circuit High >> When Monitored

When Monitored

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition on and the Occupant Restraint Controller (ORC) configured for a Driver Seat Belt Buckle Switch. The ORC monitors the switch input current ranges at power up and continuously every 60ms.

scientia non olet · About LEMON Manuals