LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Occupant Restraint Controller (Orc) - DTCS B1B00 To B1C19) >> DTC Troubleshooting >> B1B51-1ST Row Driver SEATBELT Sensor Circuit High >> Notes

B1B51-1ST Row Driver SEATBELT Sensor Circuit High: Notes

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 1st Row Driver Seatbelt Sensor Wiring Diagram
GC0150372Courtesy of CHRYSLER GROUP, LLC
NOTE:

The ORC module can not recognize the difference between the High, Open and Low code. The diagnostics check for all faults of the switch sensor and ground circuit.

For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article  .