Theory Of Operation
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
The purpose of the shut down timer diagnostic is to determine if the PCM internal clock is running as expected. This engine off timer is used as an enable condition for various OBD monitors. The rationality test consists of two tests used to evaluate shut down time.
During an initial engine start, if it is determined that the engine start is a cold start (determined by comparing the engine coolant temperature versus ambient temperature), the
Slow Test
will be run and a long shut down time would be expected. If it is determined that the engine start is not a cold start, the
Fast Test
will be run and a short shut down time is expected because the engine has not been cooled down to cold start conditions.
- The P1607 DTC will set if the Slow Test diagnostic runs and fails.
- The P2610 DTC will set if the Fast Test diagnostic runs and fails.