Screen-Air Inlet
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LHD model shown in illustration. RHD model similar.
- Position the HVAC housing air inlet screen (2) to the cowl panel (3) and fully engage the three push-in retainers (1) that secure the screen to the panel.
- Install the cowl grille screen. Refer to COVER, COWL PANEL, INNER, INSTALLATION and/or COVER, COWL PANEL, OUTER, INSTALLATION .