Diesel Engine

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Before proceeding, refer to WARNING .

Siphon as much fluid as possible from the power steering fluid reservoir.
Remove the engine appearance cover.

Fig 1: Removing/Installing Pressure Hose At Pump Pressure Port - Diesel Engine
Courtesy of CHRYSLER GROUP, LLC
Remove the pressure hose routing bracket bolt (2) to the upper mount (7).
Remove the pressure hose (3) at the pump pressure port (4).

Fig 2: Removing/Installing Supply Hose At Power Steering Pump - Diesel Engine
Courtesy of CHRYSLER GROUP, LLC
Remove the hose clamp (3) securing the supply hose (1) at the pump.
Remove the supply hose (1) from the pump (2).

Fig 3: Power Steering Pump & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the drive belt. Refer to BELT, SERPENTINE, REMOVAL .
Remove the two pump mounting bolts (1) through the pulley (2) openings.

Fig 4: Rear Pump Mounting Bolt - Diesel
Courtesy of CHRYSLER GROUP, LLC
Remove the rear pump mounting bolt (2) behind the pump (1).
Remove the power steering pump (1).