LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Steering System) >> Pump >> Hose, Power Steering, Supply >> Removal >> 2.0L/2.4L Engine

2.0L/2.4L Engine

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before proceeding, refer to WARNING .

  1. Siphon as much fluid as possible from the power steering fluid reservoir.
    Fig 1: Supply Hose
    GC0082520Courtesy of CHRYSLER GROUP, LLC
  2. Remove the clamp (2) securing the supply hose to the power steering pump supply fitting (3), then remove the hose from the supply fitting.
    Fig 2: Fluid Reservoir, Return Hose, Supply Hose & Mounting Screw
    GC0082527Courtesy of CHRYSLER GROUP, LLC
  3. Remove the hose clamp securing the supply hose (4) to the power steering fluid reservoir (5). Slide the hose off the end of the reservoir fitting and remove from vehicle.