3.6L Engine

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clamp, Supply Hose & Steering Pump

Courtesy of CHRYSLER GROUP, LLC

Place the pump end of the supply hose onto the pump (4) supply fitting. Expand the hose clamp (3) and slide it over the hose and pump supply fitting. Secure the clamp once it is past the bead formed into the fluid supply fitting.
Lower the vehicle.

Fig 2: Hose Clamp & Fluid Reservoir
Courtesy of CHRYSLER GROUP, LLC
Place the reservoir end of the supply hose onto the reservoir (1) supply fitting. Expand the hose clamp (3) and slide it over the hose and supply fitting. Secure the clamp once it is past the bead formed into the fitting.
Fill and bleed the power steering system. Refer to STANDARD PROCEDURE .
Check for leaks.