2.0L/2.4L Engine

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Supply Hose

Courtesy of CHRYSLER GROUP, LLC

Slide hose clamps (2) onto both ends of the power steering fluid supply hose (1) far enough to clear the fittings on the reservoir and pump once the hose is installed.
Place the pump end of the supply hose (1) onto the pump supply fitting (3). Expand the hose clamp (2) and slide it over the hose and pump supply fitting. Secure the clamp once it is past the bead formed into the fluid supply fitting.

Fig 2: Fluid Reservoir, Return Hose, Supply Hose & Mounting Screw
Courtesy of CHRYSLER GROUP, LLC
Place the fluid reservoir end of the supply hose (4) onto the reservoir (5) supply fitting. Expand the hose clamp and slide it over the hose and fitting. Secure the clamp once it is past the bead formed into the fluid reservoir fitting.
Fill and bleed the power steering system. Refer to STANDARD PROCEDURE .
Check for leaks.