LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Steering System) >> Pump >> Hose, Power Steering, Pressure >> Removal >> Right-Hand-Drive - 2.0L Diesel Engine

Right-Hand-Drive - 2.0L Diesel Engine

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before proceeding, refer to WARNING .

Fig 1: Removing/Installing Pressure Hose At Pump Pressure Port - Diesel Engine
GC0082522Courtesy of CHRYSLER GROUP, LLC
  1. Siphon as much fluid as possible from power steering fluid reservoir.
  2. Remove the engine appearance cover.
  3. Remove the pressure line (3) at the pump (4).
  4. Remove the pressure line routing bracket bolt (2) at the upper mount (7).
  5. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    Fig 2: Removing/Installing Return Hose & Pressure Hose At Steering Gear
    GC0098924Courtesy of CHRYSLER GROUP, LLC
  6. Unthread the tube nut (2) and remove the pressure hose (2) at the steering gear.
  7. Remove the power steering pressure hose from the vehicle.