LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine Cooling System) >> Engine >> Pump, Water >> Removal >> 2.4L Engine

2.4L Engine

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Water Pump - Gas Engine
GC0082358Courtesy of CHRYSLER GROUP, LLC
1 - WATER PUMP
2 - MOUNTING BOLT
3 - WATER INLET TUBE NUTS
4 - INLET WATER TUBE
  1. Remove the serpentine drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the splash shield.
  4. Drain the cooling system. Refer to STANDARD PROCEDURE .
  5. Remove the bolts and the water pump pulley.
  6. Remove the bolts (2) and the water pump (3).
scientia non olet · About LEMON Manuals