LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine Cooling System) >> Engine >> Fan, Cooling >> Removal >> Removal

Fan, Cooling: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The cooling fan is integrated into the front radiator closure panel and can be removed separately.

  1. Disconnect and isolate negative battery cable.
  2. Remove the air filter body. For 2.4L, refer to BODY, AIR CLEANER, REMOVAL . For 3.6L, refer to BODY, AIR CLEANER, REMOVAL .
    Fig 1: Windshield Washer Reservoir, Core Shroud, Radiator Fan & Mounting Bolts
    GC0147050Courtesy of CHRYSLER GROUP, LLC
  3. Remove windshield washer reservoir (1).
  4. Disconnect radiator fan electrical connectors.
  5. Remove the wiring harness from the lower fan.
  6. Remove the four mounting bolts (4) from the radiator fan (3) assembly.
  7. Remove radiator fan assembly from the core shroud (2).
scientia non olet · About LEMON Manuals