LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine Cooling System) >> Engine >> Bottle, Coolant Recovery >> Installation >> 2.4L/3.6L

Bottle, Coolant Recovery: Installation: 2.4L/3.6L

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Coolant Recovery Container, Return Hose, Lower Supply Hose & Mount Bolts
GC0147049Courtesy of CHRYSLER GROUP, LLC
  1. Install the lower supply hose (5).
  2. Position the coolant recovery bottle (1) into vehicle.
  3. Install the coolant recovery bottle bolts (2) and tighten to 6 N.m (53 in. lbs.).
  4. Install the return hose (3) at the upper coolant supply fitting.
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals