LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine Cooling System) >> Accessory Drive >> Pulley, Idler >> Removal >> 3.6L

Pulley, Idler: Removal: 3.6L

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
  2. Remove the support and lower the vehicle.
  3. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
    Fig 1: Idler Pulley, Water Pump & Bolts
    GC0144238Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolt and the idler pulley (4).
scientia non olet · About LEMON Manuals