LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine Cooling System) >> Accessory Drive >> Pulley, Idler >> Removal >> 2.0L Diesel

2.0L Diesel

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
    Fig 1: Belt Tensioner & Accessory Drive Belt
    GC0147834Courtesy of CHRYSLER GROUP, LLC
  2. Remove the serpentine belt (3). Refer to BELT, SERPENTINE, REMOVAL .
    Fig 2: Idler Pulley Mounting Bolt & Idler Pulley
    GC0147850Courtesy of CHRYSLER GROUP, LLC
  3. From under the vehicle, remove the appropriate idler pulley mounting bolt (3, 4) and the idler pulley (1, 2).
scientia non olet · About LEMON Manuals