LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine Cooling System) >> Accessory Drive >> Pulley, Idler >> Installation >> 2.4L

Pulley, Idler: Installation: 2.4L

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accessory Drive Belt Idler Pulley - 2.4L
GC0098605Courtesy of CHRYSLER GROUP, LLC
1 - UPPER IDLER PULLEY
2 - LOWER IDLER PULLEY
  1. Install the lower idler pulley (2). Tighten the bolt to 50 N.m (37 ft. lbs.).
  2. Install the upper idler pulley (1). Tighten the bolt to 50 N.m (37 ft. lbs.).
  3. Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals