LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Engine Cooling System) >> Accessory Drive >> Pulley, Idler >> Installation >> 2.0L Diesel

2.0L Diesel

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Idler Pulley Mounting Bolt & Idler Pulley
GC0147850Courtesy of CHRYSLER GROUP, LLC
  1. Install the idler pulley (1, 2) and the bolt (3, 4) from under the vehicle. Tighten the bolt to 50 N.m (37 ft. lbs.).
    Fig 2: Belt Tensioner & Accessory Drive Belt
    GC0147834Courtesy of CHRYSLER GROUP, LLC
  2. Install the serpentine belt (5). Refer to BELT, SERPENTINE, INSTALLATION .
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals