Belt, Serpentine: Removal: 3.6L
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not let tensioner arm snap back to the freearm position, severe damage may occur to the tensioner.
- Disconnect and isolate the negative battery cable.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the tire and wheel assembly.
- Remove the wheel house splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
- Rotate belt tensioner (8) until it contacts its stop. Remove belt (7), then slowly rotate the tensioner into the freearm position.