LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Exhaust System) >> Sensor, Exhaust Temperature, 2.0L Diesel >> Installation >> Exhaust Temperature Sensor 1/1

Exhaust Temperature Sensor 1/1

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upstream Exhaust Temperature Sensor, Wire, Bracket & Connector
GC0153964Courtesy of CHRYSLER GROUP, LLC
  1. Install the upstream exhaust temperature sensor 1/1 (5) and tighten to 45 N.m (33 ft. lbs.).
  2. Attach the upstream exhaust temperature sensor 1/1 wire harness connector (3) to bracket (4).
  3. Attach the upstream exhaust temperature sensor 1/1 wire (1) to heat shield (2).
    Fig 2: Upstream Exhaust Temperature Sensor Connector
    GC0153959Courtesy of CHRYSLER GROUP, LLC
  4. Connect the upstream temperature sensor wire harness connector (1).
    Fig 3: Engine Cover
    GC0148021Courtesy of CHRYSLER GROUP, LLC
  5. Install the engine cover (1).
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals