LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (2.4L Engine (Service Information)) >> Cylinder Head >> Camshaft, Engine >> Standard Procedure >> Standard Procedure - Measuring Camshaft End Play

Standard Procedure - Measuring Camshaft End Play

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Measuring Camshaft End Play
GC0121429Courtesy of CHRYSLER GROUP, LLC
  1. Using a suitable tool, move camshaft as far rearward as it will go.
  2. Zero dial indicator.
  3. Move camshaft as far forward as it will go.
  4. Record reading on dial indicator. For end play specification, refer to 2.4L ENGINE SPECIFICATIONS .
  5. If end play is excessive, check cylinder head and camshaft for wear; replace as necessary.
scientia non olet · About LEMON Manuals